High yield cards suspend

🙋 Support
1

Hi, I am trying to suspend only the high yield cards for particular blocks, I did it in the past for some reason it’s not working now. I also tried pasting “tag:#AK_Step1_v12::^Other::^HighYield” and hitting enter and nothing happens. Any advice? I had this issue before and it got resolved not sure how but I am having the same issue again

2

I’ll help you with suspending high yield cards. Let me search for relevant information about this issue in our community.

Thinking...

Search
Found 3 results for ‘tags:official suspend high yield tags ankihub’

Search
Found 2 results for ‘tags:official high yield suspend cards ankihub’

Read topic
Reading: :crown: What is the “High Yield” tag and how should I use it?

Search
Found 6 results for ‘tags:official tag search browser’

Search
Found 2 results for ‘tags:official search syntax tag browser’

Hi Neetigalwankar,

It sounds like you’re trying to suspend high-yield cards for specific blocks using tags. The search syntax for tags is very specific in Anki, and there might be a few reasons why your search isn’t working now.

Troubleshooting Steps

  1. Check your tag syntax:
    When searching for tags in the browser, make sure you’re using the correct format. For high-yield cards in the AnKing deck, the proper tag format is:

    tag:#AK_Step1_v12::#Low/HighYield::1-HighYield

  2. Browser search limitations:

    • Make sure you’re hitting Enter after typing the tag search
    • Ensure there are no extra spaces in your search
    • Try clicking directly on the tag in the tag browser (left side panel) instead of typing it

  3. Tag hierarchy:
    The high-yield tags in the AnKing Step deck are organized in a specific hierarchy under #AK_Step1_v12::#Low/HighYield, with five sub-categories:

    • 1-HighYield
    • 2-RelativelyHighYield
    • 3-HighYield-temporary
    • 4-LowerYield
    • 5-LowYield

How to Properly Search and Suspend

  1. Open the Anki Browser
  2. In the left sidebar, navigate to the tags panel
  3. Expand #AK_Step1_v12 folder
  4. Find and expand #Low/HighYield
  5. Click directly on the specific yield level you want (e.g., 1-HighYield)
  6. Once the cards are displayed, select all (Ctrl+A)
  7. Right-click and choose “Suspend”

If you’re trying to combine specific blocks with high-yield tags, you can try a search like:

tag:#AK_Step1_v12::^Other::^HighYield tag:YourBlockTag

For more information about the high-yield tag system in the AnKing Step Deck, check out this article.

Let me know if these steps help or if you need more assistance!

3

Hello, :slight_smile:

It looks like the bot pretty well covered your questions, though please let us know if there is anything else we can help with

4

Thanks, the tag given here worked is it possible to get the #2 and #3 tags as well, on my anki deck I only see #1 and #2 and those are not the right tags because when I paste them they do not work and I do not even see #3 #4. Thanks again

5

Hello,

You can access the cards for a specific tag simply by clicking on the tag. This will automatically enter the correct search term into the search bar. The yield tags are located here:

image
image489×500 70.4 KB

However, if you prefer, here are the correct search terms for each of the yield tags:
tag:#AK_Step1_v12::#Low/HighYield::1-HighYield
tag:#AK_Step1_v12::#Low/HighYield::2-RelativelyHighYield
tag:#AK_Step1_v12::#Low/HighYield::3-HighYield-temporary
tag:#AK_Step1_v12::#Low/HighYield::4-LowerYield
tag:#AK_Step1_v12::#Low/HighYield::5-LowYield

Let me know if you need help with anything else! :blush:

6

Thank you so much!!

1 Like
7

This topic was automatically closed 7 days after the last reply. New replies are no longer allowed.